Ibanez S570B: (Slight) Set up

I was rather fortunate to have acquired this particular Ibanez S570B as it manifested one of the best QC from the Indonesian plant. The neck was ramrod straight so no adjustments were required but take a look at the bridge in the above pic- it's embedded too much into the cavity implying a very low action. To many of us, we equate very low action to shredding goodness- the lower the action so the more desirable it would be, yes? But that's not the case if it impedes movements, especially so if it affects your (individual) playability.

So the objective here was to raise the action to suit my playing comfort, first up would be the unlocking of the top-lock (nut) device. Many of us tend to overlook the (bridge) fine tuners before we do this, we should level the tuners prior to unlocking the nut because we need a 'neutral' positional reference when we next fine-tune our instruments. Raise/ lower the tuners to a mid-point position, this way we get equal travel to compensate the need to sharpen/ flatten tuning after we lock the nut. 

After tuning, do check your bridge alignment (side view) to see if it's sitting parallel to the body's top surface; in my case, it wasn't. The springs-strings required a balancing act & I couldn't be more grateful to Ibanez for this exposed feature- it provided easy access to the thumb-wheel adjuster. 

And there we have it, a raised action (but still low) & a leveled bridge alignment. Since it was a slight adjustment (magnified by the big photos here) the intonation stayed true so no adjustments necessary there. Great guitar this S570B.