Intonatable

Sincerely hope this MannMade bridge will make its way here. Some of us own such guitars sporting a stop tail unit but without intonation features so we face issues with thicker gauge strings ( .011s & above).

Wrapover explained

People have been asking me why I wrapover my strings at the stop tail portion as seen above. Here's an overdue explanation why that happens to all my tune-o-matic type bridge, one thing's for sure though- it's not a Joe Bonamassa technical emulation. I've been doing this way before I know who JB is.

Forgive the crude illustrations but here goes (side view of guitar body at the bridge area):

• A: Guitar strings
• B: Tune-o-matic bridge
• C: Stop tail

Every time I acquire a guitar with a tune-o-matic + stop tail bridge type, I'd lower the action to suit my playing. This would mean component B would be screwed down. The immediate effect of this procedure is that A loses tension even after the instrument had been re-tuned. This is bad because the lower tension would mean the strings won't stay put at B's slotted tip; they would get dislodged from the slots if I bend or pick hard.

So to return A to its correct tension setting, I lower C- it's lowered to its lowest possible position. But take a look at what happened there- the strings come into contact with B. This causes buzzing at that spot & you don't want that to happen.

It's a simple problem, yes? The simple solution here is to employ the wrap over stringing so that the angle created from the tip of B to C would ensure strings elevation, ta da! No more contact with B. So that's why you see what you see, it's a practical need as opposed to the primary aim of adding more resonance at the bridge area. But the fact that it does is a bonus :-)