Revival Thursday

Not too long ago, this guitar was unplayable. It's been looked into & the following tweaks were done...

The primary fault was the chronic fret buzz. It seems that someone tried to file the frets down to get rid of this but was unsuccessful. There were black marker stains on many frets. It's the typical (& correct) approach of identifying problematic frets & marking them down for filing. The stains would be gone when the filing's done but in this case residue black stains were not taken care off.

A closer look revealed a need for proper neck tilt. I managed to shim the neck (hence the visible maple bit you see above) to raise the rest level as well as rectify the tilt angle. The neck was also bowed & that was easily attended to via a quick truss rod tweak. Action was re-set for a set of 9 - 42 but there's residue string buzz. Culprit - popped out frets. These were hammered in. Only 2 frets underwent minimal filing. I wonder what happened to this guitar along the way & the way it was re-set up disappointed me because it was still unplayable but put up for sale. Tsk, tsk, tsk...

The default Ibanez Quantum pickups meant nothing to me. Seymour Duncan JB / Jazz are the replacements. The gold pole pieces - inexpensive tweak to match the hardware livery of the guitar. Adds zilch to tone, of course.

The 5-way selector is the circuit board type to supplement the coil split option. The terminals are well-labelled but you need to follow the replacement pickup manufacturer's colour code which might be different from the Ibanez pickup colour code (seen above).

This gap between the saddles might be minimal but it caused string misalignment (against the pickup pole pieces). Noticed the other saddles are seated properly without gaps in between? Well, so much for QC.

Also replaced - tuners. The default ones were locking version but it added weight to the headstock & the neck dive was intolerable. Easy fix, yes?