Friday, November 20, 2026

84


This had been a problematic Kramer '84. It took me a while to figure things out but it's now a solid player. I had shelved this resurrection for a bit because I know it's gonna be time consuming & patience wearing commitment but hey, it turned out alright.


Quite obviously, this '84 was given a pickup mounting ring to hide the sorry state of its cavity. When this guitar was handed over to me, it only had one string on, the pickup was removed & there was a gaping hole on one of the sides where the pickup flap is located (bass side). I noticed that flap was damaged by a probable attempt to remove a dead screw. True enough, there was a broken screw shaft embedded in the hole in the cavity. 

As soon as I got that out of the way (more drilling, excavating & finally filling up with wood filler), the mounting flap was fixed into place but the depth of the cavity was not meant for a pickup mount. I had to saw off the pickup height screws in half to accommodate this shallower consideration. A fresh set of Olympia 9s & a visit to Beez to re-connect the pickup. The default pickup here is the Duncan JB.


The only reason I agreed to purchase this one was because it was offered for less than 1/3 its original price. It's also from the initial batch of re-introduction which was made in Korea. This had been a nice segue into the weekend. Wishing everyone a good break ahead.

Thursday, November 19, 2026

Black guard Heritage


The term black guard refers to Fender's 50s era Telecaster sporting a single ply black pickguard. Those guitars cost quite a bit today. My black guard Strat here is a Japanese model, not on par with the aforementioned Teles when it comes to value comparison. In any case, no shops here are selling a single ply black pickguard for Strats. I bought a three ply version & blacked out the sides to make it look like a single ply. I thought it looks good this way. I did not purchase this guitar from the local stores here, it's from Ishibashi online, was listed on a discount due to a blemish.


This pack of Harmony strings were from January. It somehow got hidden in my stash but it's in very good condition.

I love this Strat. It's one of the better sounding ones featuring stock pickups. It seldom got played because it's rather heavy (ash body) but it's one heck of a player tone-wise.

Wednesday, November 18, 2026

JC


Was in my feeds yesterday, the passing of John Christ, Danzig's ex-guitarist. To me, he's someone who took his time to craft good guitar tunes. Gone but not forgotten.

Pic: JCIG

Tuesday, November 17, 2026

Back to distortion


Spending time with my Schecter, it's now sporting a pair of SD Distortions. This guitar is such a joy to play but it's a little on the hefty side. Also, I might remove the push-pull coil split feature here & assign that mini toggle to do just that. 


Fresh set of EB 9s before things started.

Monday, November 16, 2026

Slanted


Look at this rubbish. I was re-stringing this guitar just a couple of days ago & was wondering why this pickup didn't sit level against the guitar's body surface. I removed the pickup & re-mounted it adding some foam cushion underneath to straighten things but it was still off. 

A quick look from this angle shows the bobbins being slanted to begin with. It's clearly a B-stock & we wonder how it got past QC. I got this during a sale so I don't mind living with this little bit of anomaly because the pickup still works fine. Would you return this to the store & request for an exchange / refund? 

Sunday, November 15, 2026

Endur monologue


What's an EndurNeck?
It's a proprietary design for Strandberg guitars where the neck surface is flattened diagonally across its length from the lower fret bass side to the treble end at the neck-body joint area.

What does it serve?
The manufacturer purports that the flattened surface helps the thumb rests better during playing unlike the conventional curved surface. This reduces lethargy & increases playing proficiency.

After trying, what is your view of this design?
Coming from someone who dislikes a V-neck profile, the EndurNeck design manifests similar protrusions. It feels like something is digging into the thumb while playing unless your thumb is placed exactly on the flat surface. The diagonal design means your thumb moves down diagonally as well during play & this might not be the preferred movement for some players. The human aspect of playing the guitar is such that the player becomes more proficient when the thumb placement & overall hand posture conforms to the player's personal comfort. The EndurNeck design might compel the player to move according to the designed profile & not according to the player's natural preference.


So you are saying the EndurNeck is a bad design?
Of course not. The EndurNeck profile might address some playing inefficiency for some players by subliminally guiding the hand posture during play. However, it's not a sure formula for all players. The strength of the EndurNeck design lies in its flat surface consideration which is not new. There are already flat-ish neck profiles out there like the Flat C & U (ESP guitars, notably) but nobody made efforts to strategically provide flat surfaces on specific parts of the neck as a mean to address efficiency till the EndurNeck comes along. 

Final thoughts?
The EndurNeck profile is a hit / miss affair, it is definitely not a superior design but a very commendable innovation. If you are the type who enjoy owning a few guitars for inspiration, having a different neck profile like the EndurNeck might just be the inspiration you need on some days. Really hope the Strandberg brand could be more accessible here (currently no local distributors) & more affordable iterations would be offered along the way. 

Pics: Strandberg / GKW

Saturday, November 14, 2026

Work ethics


One of my favourite S-Series - SIX6FDFM. Love the satin finish. I know it's not to everyone's liking but a lack of final lacquer overcoat somehow makes the instrument a little lighter. Not that the S-Series are heavy guitars to begin with.


A fresh set of DRs before play started.


I play the upper frets more when I'm with this one so I decided to shim the pocket to lower the action & was taken aback by this sight. After drilling the holes, it seems that the factory hands didn't give a hoot about clearing the mess before attaching the neck. The work ethics at the Indonesian plant could have been better. Does it take long to clear this mess? Darn.

Friday, November 13, 2026

540PIII - up


The Ibanez 540PIII HH is now available at Swee Lee & it's $50 more than its HS counterpart. 

Does it cost more due to its 1) Full size neck humbucker + 2) Pickguard? I have absolutely no idea. Manufacturers / dealers would take every opportunity to exercise product differentiation through prices. They will cite additional manufacturing materials & even extra man hours to address that bit of a difference. We see this happening in the Fender / Gibson camp, among others. 

We must also not rule out the fluctuating exchange rate when dealers price their inventory. Bottom line - many factors contributing to price hikes, it's very difficult to pin point the culprit for sure, especially when you are at the buying end.

Pic: Ibanez

Thursday, November 12, 2026

R304

I'm rather partial to short scale basses namely because they're better suited for smaller built individuals like yours truly. Cort has this new release - the Retro 304 in the finishes you see above. These are 30" in scale length, very much in the Fender Mustang ballpark. I encourage guitar players to actually own a bass so that they can re-think their playing while handling the bass. Let's see how much these would list for once they get here.

Pics: Cort

Wednesday, November 11, 2026

Headless spot


This is Schecter's JOL Series OL-NV_HL headless guitar. You won't find any of these listed on Schecter's web page any more as they were spot models. They were there to test some things out so production was limited & terminal. If you wish for a headless Schecter now, the Synester version is the way to go. As for me, signature models are not my thing.

The guitar came in with a set of 10s in there which strangely felt normal for a 25.5" scale length, no extra tension felt. The action at the upper frets could have been better, all these before a re-string & set up.


As suspected, the neck tilt was already addressed at the factory. This is a factory default shim, it was not replaced with a thicker substitute. I merely added a thin layer on top of this one & it addressed the situation well.


My final set of DR 9s into this one. Will be getting more DRs once some sort of promo kicks in 😅 This is my personal headless guitar after-thoughts, you are free to disagree:
  • The headless unit lacks counter-tension at the headstock to properly manifest that standard tension feel. That's right, once you lock the nut end of the strings, all tension related adjustments would be at the bridge end & it's a pulling mechanism, not a winding one like we are used to when re-stringing guitars with proper headstock tuners.
  • There's play at the bridge which affects tension. I only discovered this after stretching each string & realized there's some wiggle space at the bridge each & every time a string is stretched. This is why, after stretching each string, it could be detuned to as much as a whole step down. This is true for all such bridge / tuning mechanisms. I've been through three thus far; Ibanez, Kiesel & Schecter. Each guitar manifested this same issue. So folks, if you wish to embrace thicker string gauges because you detune your instruments, best if you don't play a headless unit. 
PS: This guitar was actually mentioned here back in 2024: CLICK

Tuesday, November 10, 2026

ONPA T-Style


Good Tuesday morning. Played this yesterday & a little bit more this morning before leaving the house.


Saw mould forming on the hardware, decided to remove the strings to attend to that. A fresh set of Rotos for the next round.


I'm very impressed with the Seymour Duncan Five Two; very snappy at the bottom end. The top end, according to the manufacturer, had been tamed a tad but it still sounds very clear with good note separation.

Monday, November 9, 2026

Discolour


I was wondering why there's a discolouration at this part of the guitar neck (Ibanez S970).


Here's the reason - part of the neck is in contact with the hard case, the other is not. 😅

Sunday, November 8, 2026

Deepavali 2026


Best wishes to those celebrating. There rest of us are celebrating the long weekend, of course. One more public holiday to go before the year turns.

Nut Job: LP


Last night's minor surgery - nut replacement for my LP Studio 60s tribute. Yes, I do nut replacements myself, I learned how to remove glued-on nuts carefully over the years & file the slots accordingly to suit the guitar.


This was what happened - I flicked the strings aside to lubricate the slots after re-stringing the guitar & it got chipped at two spots (blue arrow). There were also rusts embedded into the slots which could not be removed (red arrow). The guitar nut is an expendable item, we should not be too sentimental when replacement is due.


So my beloved P90 LP was good to go. When both pickups are activated, it sounds good (to me) for tapped notes. Also, nothing beats the P90 growl for doom.

Saturday, November 7, 2026

ASAT Saturday


Enough of humbucking tones for this week, time for some single coil action. Glad I grabbed this before City Music moved out of Peace Center & the G&L brand calling it a day: Fullerton Deluxe ASAT Classic. I didn't realize those are brass saddles till I did a re-string 😅


I still have a few Rotos in the house & a set went into this guitar. Those MFD pickups are wicked in driven settings. I have no idea if this was meant to be as such because we normally grab a Tele-esque guitar for crystalline cleans. I'm not much a of a clean player anyway.

Friday, November 6, 2026

Premium S


I realized this is the only Premium Ibanez model that I currently own. Used to own a Premium RG once but that was sold off more than five years ago. The Premiums were / are not a hit with me, I prefer paying for a standard instead. This S970 is rather heavy due to the ZR bridge there which is also not my thing. There'a a cult following for this bridge with ardent fans calling for its return. Nope, not for me. 


Rotosound pinks before things got going.


SD in this one:
  • Jazz (n): One of my go-to neck pickup because it sounds good in both clean & driven modes
  • Q-Pound (m): I had to push this one quite deep into the cavity to level its volume against the neck / bridge counterpart. Despite its high output nature, it sounds darn good clean. Never dismiss any pickup's reputation just because the manufacturer touted it to be of a certain character.
  • '59 Custom: This one's rather fat-sounding despite its truncated bottom end. 

Thursday, November 5, 2026

B-pop (2)


Had a good time with the RG1451 for the last few days or so. Maybe it's the psychology of playing a fixed bridge guitar; I feel more accomplished. 😅


I have no excuses for not liking my tone as I have Seymour Duncans in this guitar: Jazz (n) /Classic Stack (m) / JB (b). I don't use the middle pickup much but it got some play time nevertheless.


Every time I thought I ran out of Ernie Ball strings, I discovered I still had a final set waiting to be used. I dated my strings upon purchase & this was from an August '26 acquisition.

Wednesday, November 4, 2026

Ibanez - DB (2)

This Tube Screamer is a part of the Ibanez - Dragon Ball collaboration that happened recently (Oct '26). Yes, it's just a standard TS-808 with the DB aesthetics. If you missed it, that's the unique star LED on the pedal.

Pic: Ibanez

Tuesday, November 3, 2026

Mikro November

A low key release by Ibanez this November - a couple of Gio Mikro basses. I continue to respect Ibanez for remembering us players with limited purchasing powers. We want affordable starter instruments but we want quality as well. The GIOs are meeting both expectations.

Pics: Ibanez

Monday, November 2, 2026

GS Monday


I am grateful for:
  1. Having affordable guitars to tinker with. Thusfar, the cheaper stuff I purchased (mostly used) had been giving me greater returns. These are basically the entry-level Ibanez GIOs & Jackson JS models. Over time, I  am able to identify the models which are really worth getting to avoid buyers' remorse. Yes, the entry-level stuff are getting better but majority of the brands are still offering dodgy instruments which are better disguised. 
  2. Getting away with DIY. I've not been to any techs here for guitar rectifications except for the electronic works. I leave this to Beez as he's more learned in this department. More importantly, I've done away with the tools for electronic rectifications. 
Today, it's just the Ibanez GS121 for the morning. This guitar (pre-owned) sounds more appealing after the pickups swap & it looks very personalized after a flip-flop re-finish. Along the way, I dabbled with minor repairs after understanding what needed to be done (knowledge is essential). I got away with makeshift tools as well because there are general purpose alternatives that could get things done. It doesn't have to be a Stew Mac option every time because we very well know that the brand name makes it more expensive than the lesser known counterpart which still gets the job done. 

Sunday, November 1, 2026

B-pop


This guitar had not been played for a while. Decided to give it a fresh set of strings before playing. String buzzing detected  from 14th - 23rd fret. Darn. 
  1. Straightened the neck
  2. Checked for unlevelled frets, as seen in the pic above, buzzing only occurred on those marked out areas. That's right, the buzzing was not entirely across each fret but occurred at some parts only
  3. Hammered. After some hammering, only three frets required levelling & re-dress. 
Reminder to all those who are addressing fret issues yourselves - hammer first, file subsequently  (if necessary). Also, reminder to self - do not remove the old strings before checking for fret issues first. It's quite a challenge to keep the new strings in place while attending to the problematic frets. 

To be continued...